空间遥感相机长条反射镜组件的动力学特性分析

空间遥感相机长条反射镜较圆反射镜的整体刚度相差很大,整个组件在随火箭发射过程中因力学环境引起的自身位置改变导致面形的微小畸变从而对成像质量造成严重影响。因此,反射镜组件的设计就成为整个相机系统研制的重点与难点之一。对其进行科学、严谨的力学环境仿真是设计中的有效辅助手段。对某相机的长条反射镜组件动力学响应进行了较为深入的研究,借助MSC-patran,用有限元法进行了求解。获得了组件的动力学特性。     

高速双边缘光纤光栅波长解调技术

提出一种双边缘结构对光纤光栅传感进行波长解调的方案，利用被测光谱通过不同光谱特性的滤波器时输出不同光强的比值确定被测光的波长.该系统在解调时不存在任何机械移动部分，比扫描式的解调方法测量速度更快，运行时更稳定、更精确.     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

Natural vibrations of a strip made of a composite material with a locally curved structure

The possibility of using the finite-element method for investigating two-dimensional problems on natural vibrations in the mechanics of composite materials with curved structures is considered. With the example of a hinge-supported strip made of a composite material with a locally curved structure, the influence of geometrical and mechanical parameters of the strip on its eigenfrequencies is examined. It is established that the presence of local curving in the structure of strip material decreases the magnitude of eigenfrequencies.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 71–78, January–February, 2005.     

Millimeter wave beams diffracted from reflecting gratings

According to the angular-spectrum method, a radiation beam of an antenna horn in the Fresnal region is decomposed into the plane waves with the fast Fourier transform algorithm and the waves diffracted from a reflection grating are superposed as a diffracted beam. Compared with the reflected beam from the same size mirror, the radiation half width of the diffracted beam from a grating is narrower and its lateral shape is shift. These performances have been experimentally verified at Ka-band by: (1). The relative diffraction efficiencies in the first order with two triangular gratings which is put along propagating direction of a beam produced by a conical lens-horn. (2). H-plane lateral width with power—3dB lapsed of the focus beam from a grating and a mirror in a grating spectrometer for millimeter waves (25–100 GHz).     

压印光刻中的两步对正技术

压印光刻中套刻需要粗、精两级对正.实验采用一对斜纹结构光栅作为对正标记.利用物镜组观察光栅标记图像的边界特征进行粗对正,其准确度在精对正信号的捕捉范围内；利用光电接收器件阵列组合接收光栅莫尔信号，在莫尔信号的线区进行精对正.由于线性区的斜率大, 精对正过程中得到相应x,y方向的对正误差信号灵敏度高,利用高灵敏度对正误差信号作为控制系统的驱动信号,对承片台进行驱动定位,实现精对正.最终使X,Y方向上的重复对正准确度分别达到了± 21 nm(± 3σ)和±24 nm(± 3σ).     

新型高准确度光纤光栅压力传感系统

提出一种使用光纤双布喇格光栅测定压力的测量方法.在外界压力作用下，传感光纤布喇格光栅反射波长的漂移,被转变成在交变力策动下,发生弯曲的等强度悬臂梁调制扫描光栅反射光脉冲间隔的变化.实验结果表明，光纤布喇格光栅反射波长漂移的测量范围为0～3 nm，波长测量的不确定度为1 pm；压力传感器的量程为0～6 MPa时，压力的测量不确定度为0.005 Mpa.     

Dispersion Compensation in Externally Modulated Transmission System Using Chirped Fiber Grating

We present an externally modulated NTSC AM-VSB erbium-doped fiber amplifier (EDFA)-repeated system in the 1550 nm region which uses a chirped fiber grating (CFG) as a dispersion compensation device. In contrast to the conventional externally modulated fiber optical CATV systems, either with or without dispersion compensation fiber (DCF), good performances of carrier-to-noise ratio (CNR) ≥50 dB, composite second order (CSO) ≥74 dB, and composite triple beat (CTB) ≥65 dB were achieved for the full channel band after a 100-km single-mode fiber (SMF) transmission.     

Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.     

Possible application of X-ray optical elements for reducing the spectral bandwidth of an X-ray SASE FEL

A new design for a single pass X-ray Self-Amplified Spontaneous Emission (SASE) FEL is proposed. The scheme consists of two undulators and an X-ray monochromator located between them. The first stage of the FEL amplifier operates in the SASE linear regime. After the exit of the first undulator the electron bunch is guided through a non-isochronous bypass and the X-ray beam enters the monochromator. The main function of the bypass is to suppress the modulation of the electron beam induced in the first undulator. This is possible because of the finite value of the natural energy spread in the beam. At the entrance to the second undulator the radiation power from the monochromator dominates significantly over the shot noise and the residual electron bunching. As a result the second stage of the FEL amplifier operates in the steady-state regime when the input signal bandwidth is small with respect to that of the FEL amplifier. Integral losses of the radiation power in the monochromator are relatively small because grazing incidence optics can be used. The proposed scheme is illustrated for the example of the 6 nm option SASE FEL at the TESLA Test Facility under construction at DESY. As shown in this paper the spectral bandwidth of such a two-stage SASE FEL (Δλ/λ 5 × 10⁻⁵) is close to the limit defined by the finite duration of the radiation pulse. The average brilliance is equal to 7 × 10²⁴ photons/(s × mrad² × mm² × 0.1% bandw.) which is by two orders of magnitude higher than the value which could be reached by the conventional SASE FEL. The monochromatization of the radiation is performed at a low level of radiation power (about 500 times less than the saturation level) which allows one to use conventional X-ray optical elements (grazing incidence grating and mirrors) for the monochromator design.